作为收藏进行保留。以防哪天机器被我刷坏。。。
作者是lancexux,来自于安卓网,网址为http://www.hiapk.com
本贴地址为:http://www.hiapk.com/bbs/thread-18793-1-1.html
金卡也称加密卡
是htc在wm系统的做法延续到GPHONE系统上
金卡作用可以理解为就是修复机器系统
例如你机器在刷机的时候刷死了
只要能进三色屏。Gphone 系列是按返回键+开机
能进入这界面
你这个机器就有的救
可以用加密卡刷回改机器的销售地点的原版系统
你的机器就能救活了!
这样你就不用去换字库ic了
以下制作金卡方法转载自“HTC版G2 Magic柬埔寨(KHM)完美SPL 1.33.0010 S=ON制作GoldCard刷ROM成功~详细教程!”
我简单根据我的经验翻译下,和作者写的有些不同,但这个更好理解!
1. Download QMAT http://revskills.de/pages/download.html
从网站上下载Download
2. Format your memory card to fat32. Please keep in mind some card does not work.
在读卡器中格式化你的卡,一定要FAT32格式,可能有些卡不可以
然后把卡放入你的手机,要重启下手机,这样才能正常使用这张卡
3. Search in your android market for ‘Terminal Emulator’
因为没有market,所以要另外下载安装一个Terminal Emulator(超级终端),安装网上有超级终端的apk,本贴6楼有下载
4. type ‘ cat /sys/class/mmc_host/mmc1/mmc1:*/cid ‘ without the quote sign.
在超级终端中输入cat /sys/class/mmc_host/mmc1/mmc1:*/cid,然后按虚拟键盘的回车,如果不行,按下G2中间的小圆点
5. Note that code down on a notepad or something. Make sure everything is noted correctly.
记下超级终端里你输入刚才的命令后出现的一窜编码,一定要正确
6) Go to QMAT site http://revskills.de/pages/download.html, download QMAT
从网站下载QMAT,刚才不是下过了吗?怎么还要下,老外的思路。。。。
7) Extract the file, double click on qmat.exe
解压缩文件,然后双击qmat.exe
8 ) Click on Cyptoanalysis Tools > Crypto Toolbox
找到qmat菜单栏中的Cyptoanalysis Tools,然后点里面的Crypto Toolbox
9) Look way below, there is a text box (beside “Reverse String” button. Key in the cid number you’ve got earlier
Click on the “Reverse String” button, the result is reversed…
Example: 532600bd227d9c0347329407514d5402
把你刚才记下来的那串编码(如532600bd227d9c0347329407514d5402)输入"Reverse String” 按钮左边的文本框,然后按下"Reverse String”,得到反编译后的一窜CID编码,如02544d5107943247039c7d22bd002653
10) Copy the reversed cid
同样的把这串CID编码记下来
11) Go to QMAT again http://revskills.de/pages/goldcard.html to generate your goldcard (this is free for G1 phone, Thanks to Viper!)
去到这个网站,这个网站用来创建一个gold card镜像文件
12) Enter your email. For the CID, enter the reversed cid you’ve got earlier. However you need to replace the first 2 characters to 00.
Example: From “532600bd227d9c0347329407514d5402” to “002600bd227d9c0347329407514d5402”
输入你的email地址,然后输入你刚才反编译后的CID编码(前两位必须改为00),比如“02544d5107943247039c7d22bd002653”改为“00544d5107943247039c7d22bd002653”
(我做的时候貌似忘记忘记改前两位了,但还是成功了,做出来的金卡还是能用的)
13) click Continue and you will receive the goldcard.img via your email.
点击Continue,然后去你的邮箱收邮件
14) Go to your email, download the goldcard.img and save it to a directory first.
把邮件附件中的goldcard.img保存下来
15) Now, download HxD Hex Editor for this site
http://download.cnet.com/HxD-Hex-Editor/3000-2352_4-10891068.html?tag=mncol
去网站下载HxD Editor
补充一点,因为要开始修改你的SD卡了,所以要把卡再次放进读卡器里面
16) Install and launch HxD Hex Editor program
安装和运行HxD Editor
17) Go to Extra tab > Open Disk. Under Physical disk, select Removable Disk (Must be your SD card), uncheck “Open as Readonly), click OK.
点Extra tab菜单,点Open Disk,在Physical disk底下,选择Removable Disk,确定这个必须是你的SD card,不要勾选Open as Readonly,点OK
18) Go to Extra again, Open Disk Image, open up goldcard.img which you’ve saved to a directory earlier.
Now, you should have two tabs, one is your removable disk, the other is goldcard.img. Press OK when prompted for “Sector Size” 512 (Hard disks/Floppy disks), click OK.
再次点Extra tab菜单,点Open Disk Image,选择你刚才从邮件中保存下来的goldcard.img,点OK,“Sector Size” 512 (Hard disks/Floppy disks),点OK
19) Click on goldcard.img tab. Go to Edit tab > Select All, edit tab again > copy.
点 goldcard.img tab,然后在Edit菜单中点select all,然后再在Edit菜单中点copy
20) Click on the “removable disk” tab. Select offset 00000000 till offset 00000170, click on Edit tab and then Paste Write.
点 removable disk tab 选择 00000000 到 00000170的部分,点Edit菜单点 Paste Write
21) Click on File > Save. You may exit this program
点File菜单,点Save,点OK后退出
Now, do a test to see if your SD card is “compatible”
现在点击读卡器里的卡试试,如果这张SD卡还能正常用,说明成功了,如果提示要格式化,就是失败了。(我用的是2年多前多普达S1刚上市时候买的1GB的Sandisk的TF卡)
注意:制作金卡的内存卡最好不要大过1g否则无法制作成功