本来我是很讨厌一直迁移的，但burst一直无故挂掉，实在受不了。
一咬牙就换到了linode上面了，用ping.chinaz.com试了一下，好象电信访问的速度都比较慢，但联通线路却很快。（不过我在公司的电信光纤在最快的时候达到了100ms以下）
家里的网络是长宽，也很快，一下子欣慰了。
直接用Scp将burst的数据抓回来，很快，一下子就转换过来了。
准备向burst申请退款，NND。
浏览模式: 标准 | 列表2024年09月的文章
又一次迁移：将站点移到了linode上
Submitted by gouki on 2012, March 21, 9:57 PM
phpsqlsrv for windows
Submitted by gouki on 2012, March 20, 11:05 PM
http://www.microsoft.com/download/en/confirmation.aspx?id=20098
其实在很久前就有这玩意了，现在居然是3.0了。在win下用这个驱动好啊，支持最新的Sql server，而且速度很快。同时，它居然还支持了PDO。。。
下载下来很方便，有几种不同的文件，根据你当前的情况来设置：
Perform the following steps to download and install the Microsoft Drivers for PHP for SQL Server:
1. Download SQLSRV30.EXE to a temporary directory
2. Run SQLSRV30.EXE
3. When prompted, enter the path to the PHP extensions directory
4. After extracting the files, read the Installation section of the SQLSRV30_Readme.htm file for next steps
看着readme一步一步就Over了。
08年的时候根据第一版的文件写过一个很简单的连接库，替换掉了当时discuz的sql连接库。现在。。。还是用PDO吧
Persist Security InFso=true 是什么意思
Submitted by gouki on 2012, March 20, 5:25 PM
Conn2.Open "Provider=SQLOLEDB.1;Persist Security InFso=true;Data Source=192.168.1.2;Initial Catalog=xxxxx;User ID=sa;Password=123456;"
一些参考信息：
Integrated Security默认值是False，此时需要提供Uid和Pwd，即将以Sql Server 用户身份登陆数据库；如果设置为True，Yes 或 SSPI，这不能出现Uid和Pwd，将以Windows用户省份登陆数据库。强烈推荐用后一种形式，安全性更高。
参见
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cpref/html/frlrfSystemDataSqlClientSqlConnectionClassConnectionStringTopic.asp
--------
http://expert.csdn.net/Expert/topic/2930/2930660.xml?temp=.423382
Persist Security Info 布尔类型，为True时，表明采用集成安全机制；若为False，则表明不采用集成安全机制。
更多资料还是看：http://connectionstrings.com/，还是这个网站好玩。
Microsoft SQL Server Functions (PDO_SQLSRV)
Submitted by gouki on 2012, March 19, 9:28 PM
Introduction
PDO_SQLSRV is a driver that implements the PHP Data Objects (PDO) interface to enable access from PHP to MS SQL Server (starting with SQL Server 2005) and SQL Azure databases.
Installation
The PDO_SQLSRV extension is enabled by adding appropriate DLL file to your PHP extension directory and the corresponding entry to the php.ini file. The PDO_SQLSRV download comes with several driver files. Which driver file you use will depend on 3 factors: the PHP version you are using, whether you are using thread-safe or non-thread-safe PHP, and whether your PHP installation was compiled with the VC6 or VC9 compiler. For example, if you are running PHP 5.3, you are using non-thread-safe PHP, and your PHP installation was compiled with the VC9 compiler, you should use the php_pdo_sqlsrv_53_nts_vc9.dll file. (You should use a non-thread-safe version compiled with the VC9 compiler if you are using IIS as your web server). If you are running PHP 5.2, you are using thread-safe PHP, and your PHP installation was compiled with the VC6 compiler, you should use the php_pdo_sqlsrv_52_ts_vc6.dll file.
For more information about system requirements, see » SQLSRV System Requirements.
The PDO_SQLSRV extension is only compatible with PHP running on Windows. For Linux, see ODBC and » Microsoft's SQL Server ODBC Driver for Linux.
System Requirements (Microsoft Drivers for PHP for SQL Server)
SQL Server 2008 R2
To access data in a SQL Server 2005 or later database using the Microsoft Drivers for PHP for SQL Server, you must have the following components installed on your computer:
-
Supported operating systems for version 3.0 of the driver include:
-
Windows Server 2008 R2 SP1
Windows Vista SP2
Windows Server 2008 SP2
Windows 7 SP1
-
-
Supported operating systems for version 2.0 of the driver include:
-
Supported operating systems for version 2.0 of the driver include:
-
Windows Server 2003 Service Pack 1
-
Windows XP Service Pack 3
-
Windows Vista Service Pack 1 or later
-
Windows Server 2008
-
Windows Server 2008 R2
-
Windows 7
-
-
PHP 5. For information about how to download and install the latest stable binaries, visit http://php.net.
Microsoft Drivers for PHP for SQL Server, version 3.0 requires PHP 5.3.0 or later. If possible, use PHP 5.3.6, or later. The version 2.0 driver works with PHP 5.2.4 or later. If possible, use PHP 5.2.13, or later.
-
A version of the driver file must be in your PHP extension directory. See Driver Versions later in this topic for information about the different driver files. See Loading the Microsoft Drivers for PHP for SQL Server for information on configuring the driver for the PHP runtime.
(See The Data Center for the Microsoft Drivers for PHP for SQL Server for information on where to download the Microsoft Drivers for PHP for SQL Server.)
-
A Web server. Your Web server must be configured to run PHP. For information about hosting PHP applications with Internet Information Services (IIS) 6.0, see Using FastCGI to Host PHP Applications on IIS 6.0. For information about hosting PHP applications with IIS 7.0, see Using FastCGI to Host PHP Applications on IIS 7.0.
The Microsoft Drivers for PHP for SQL Server has been tested using IIS 6 and IIS 7 with FastCGI.
-
The x86 version of SQL Server Native Client is required on the computer where PHP is running. If you are using a 64-bit operating system, the x86 version of SQL Server Native Client will be installed with the x64 version of SQL Server Native Client (do not install the x86 version of SQL Server Native Client on an x64 operating system).
If you are using the SQLSRV driver, sqlsrv_client_info will return information about which version of SQL Server Native Client is being used by the Microsoft Drivers for PHP for SQL Server. If you are using the PDO_SQLSRV driver, you can use PDO::getAttribute to discover the version.
-
Version 3.0 of the driver requires Microsoft SQL Server 2012 Native Client. You can download Microsoft SQL Server 2012 Native Client from the SQL Server 2012 feature pack page.
-
Version 2.0 of the driver requires Microsoft SQL Server 2008 R2 Native Client. Click on the appropriate link below:
-
This section lists the drivers that are installed for version 2.0 and version 3.0 of the Microsoft Drivers for PHP for SQL Server. PHP version 5.2 is not supported in version 3.0 of the Microsoft Drivers for PHP for SQL Server.
Follow the installation instructions in Loading the Driver to configure the driver for use with the PHP runtime.
Microsoft Drivers 2.0 for PHP for SQL Server installs several versions of the driver:
|
Driver file |
PHP version |
Thread safe? |
Use with PHP .dll |
|---|---|---|---|
|
php_sqlsrv_53_nts_vc6.dll php_pdo_sqlsrv_53_nts_vc6.dll |
5.3 |
no |
php5.dll |
|
php_sqlsrv_53_nts_vc9.dll php_pdo_sqlsrv_53_nts_vc9.dll |
5.3 |
no |
php5.dll |
|
php_sqlsrv_53_ts_vc6.dll php_pdo_sqlsrv_53_ts_vc6.dll |
5.3 |
yes |
php5ts.dll |
|
php_sqlsrv_53_ts_vc9.dll php_pdo_sqlsrv_53_ts_vc9.dll |
5.3 |
yes |
php5ts.dll |
|
php_sqlsrv_52_nts_vc6.dll php_pdo_sqlsrv_52_nts_vc6.dll |
5.2 |
no |
php5.dll |
|
php_sqlsrv_52_ts_vc6.dll php_pdo_sqlsrv_52_ts_vc6.dll |
5.2 |
yes |
php5ts.dll |
If the name of the driver file contains "vc9", it should be used with a PHP version compiled with Visual C++ 9.0.
Microsoft Drivers 3.0 for PHP for SQL Server installs several versions of the driver:
|
Driver file |
PHP version |
Thread safe? |
Use with PHP .dll |
|---|---|---|---|
|
php_sqlsrv_53_nts.dll php_pdo_sqlsrv_53_nts.dll |
5.3 |
no |
php5.dll |
|
php_sqlsrv_53_ts.dll php_pdo_sqlsrv_53_ts.dll |
5.3 |
yes |
php5ts.dll |
Google Cloud Storage
Submitted by gouki on 2012, March 16, 11:06 PM
由于看了几个VPS都是空间比较小，所以开始考虑是否用第三方存储来放置一些数据。
其实在国外有很多类似的工具，比如dropbox,sugarsync，但这些其实在命令行下用起来都不太方便或者说用PHP调用，所以还是考虑了一些S3或者googlestorage之类的存储。
google有一些现成的工具:https://developers.google.com/storage
Google Cloud Storage is a new service for developers to store and access data in Google's cloud. It offers developers direct access to Google's scalable storage and networking infrastructure as well as powerful authentication and data sharing mechanisms. Developers can store objects of any size and manage access to their data on an individual or group basis using Google Cloud Storage.
Google Cloud Storage is accessible through its REST API or using any of the available Google Cloud Storage tools, including:
- Google Storage Manager - A graphical user interface with drag-and-drop features to manage your buckets and objects.
- GSUtil - A command line tool that lets you perform basic and advanced tasks for Google Cloud Storage.
S3的话，会相对比较资料更多一点，毕竟还是老牌供应商，这里有一篇详细教程：http://www.xieyidian.com/2665，图文并茂，在这里还有文中所提到的计算器：在线计算器
现在还在犹豫，因为毕竟我对这些都不熟，英文也烂，不知道怎么搞比较好，纠结啊。
-------
所以，本文只是备份资料，下次用的时候可以直接找到它
| « 2024年09月 » | ||||||
| 日 | 一 | 二 | 三 | 四 | 五 | 六 |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| 8 | 9 | 10 | 11 | 12 | 13 | 14 |
| 15 | 16 | 17 | 18 | 19 | 20 | 21 |
| 22 | 23 | 24 | 25 | 26 | 27 | 28 |
| 29 | 30 | |||||
日志分类
- PHP
[645] - python [9]
- Go [38]
- Flutter [14]
- lua [2]
- Scala & Ruby [12]
- Javascript [299]
- PHP Framework [64]
- Linux [283]
- 苹果相关 [225]
- DataBase [161]
- Software [234]
- Literature [9]
- Ideas [23]
- 產品 [12]
- Misc [964]
- Baby [92]
热门标签
-
mysql
php
jquery
yii
ubuntu
google
linux
javascript
firefox
肖佑阳
framework
phpstorm
database
mac
thinkphp
svn
apache
zend
typecho
wordpress
qq
连载
seo
chrome
优化
ipad
netbeans
ios
css
架构
日志归档
搜索文章
最新评论
- Thanks for finally talking about...
02-27 - 将PDF转换为PNG - 大佬你好，在用dcat 遇到 怎么做无感刷新的问题，请问你有做过...
02-01 - uc5bbl8s - 好用!!
07-14 - 口水 - 发上来共享一下啊---这个就是在7的基础上做了一些改进而已
04-25 - guest - 大佬你这个改完后，不支持低版本了，容错不行啊----还要低版本兼...
04-25 - guest
博客信息
- 分类数量: 17
- 文章数量: 3088
- 评论数量: 1908
- 标签数量: 2252
- 附件数量: 942
- 注册用户: 56
- 今日访问: 22722
- 总访问量: 47952254
- 程序版本: 1.6